configure vm-tracking vpp counters

configure vm-tracking vpp vpp_name counters [ingress-only | egress-only | both | none]

Description

Configures whether counters need to be installed for Virtual Machine MAC which receives this VPP mapping.

Syntax Description

ingress-only Only counts packets ingressing the switch whose source MAC address matches VM MAC.
egress-only Only counts packets egressing the switch whose source MAC address matches VM MAC.
both Counts packets ingressing and egressing the switch whose source MAC address matches VM MAC.
none No packets will be counted.

Default

N/A.

Usage Guidelines

Use this command to configure whether counters need to be installed for Virtual Lachine MAC which receives this VPP mapping.

Example

Example output not yet available and will be provided in a future release.

History

This command was first available in ExtremeXOS 15.3.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.