configure ports qosprofile
Description
Creates a port-based traffic group, which configures one or more ingress ports to use a particular egress QoS (Quality of Service) profile.
Syntax Description
port_list | Specifies a list of ports or slots and ports. |
qosprofile | Specifies a QoS profile. |
Default
All ingress ports have the default qosprofile of QP1.
Usage Guidelines
This command assigns traffic ingressing the specified port to a specified egress QoS profile. Extreme switches support eight egress QoS profiles (QP1 to QP8) for each port. SummitStack does not permit configuration of QP7.
Example
configure ports 5 qosprofile QP3
History
This command was first available in ExtremeXOS 11.0.
Platform Availability
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.