Configures RIPng (Routing Information Protocol Next Generation) on an IP interface.
vlan-name | Specifies an IPv6 configured VLAN (Virtual LAN). |
tunnel-name | Specifies an IPv6 tunnel. |
all | Specifies all IPv6 configured VLANs or tunnels. |
N/A.
For RIPng to be active on the interface, it must also be globally enabled using the command disable ripng export [direct | ospfv3 | ospfv3-extern1 | ospfv3-extern2 | ospfv3-inter | ospfv3-intra | static | isis | isis-level-1| isis-level-1-external | isis-level-2| isis-level-2-external | bgp]. If the keyword all is specified, all IPv6 configured VLANs or tunnels will be configured for RIPng.
configure ripng add finance
This command was first available in ExtremeXOS 11.2.
This command is available on platforms with an Edge, Advanced Edge, or Core license. For licensing information, see the ExtremeXOS 22.2 Feature License Requirements document.