configure policy maptable

configure policy maptable [response [tunnel | policy | both] | vlan_list profile_index]


Use this command to add entries to the mapping table and to set the map table response state for the switch.

Syntax Description

vlan_list VLAN (Virtual LAN) ID or range of IDs (1-4094)
profile_index Policy ID (1 - 63).



Usage Guidelines

The policy response is the default response for the configure policy maptable command.


This example adds an entry to the map table that maps VLAN 3 to policy profile 8:

configure policy maptable 3 8


This command was first available in ExtremeXOS 16.1.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.