disable network-clock ptp

disable network-clock ptp [boundary | ordinary] {{vlan} vlan_name}

Description

Disable PTP on a particular clock instance, or on a specified vlan port (clock port) of the clock instance.

PTP is disabled by default on a clock instance.

Use this command to disable PTP on a clock instance.

The following example disables the ordinary clock:

disable network-clock ptp ordinary

The following example disables the clock port lpbk-transit on the boundary clock:

disable network-clock ptp boundary vlan lpbk-transit

This command was first available in ExtremeXOS 15.1.

This command is available on Summit X460-G2, X670-G2, and X770 series switches.

Note

PTP commands can be used only with the Network Timing feature pack.

Published August 2017prev | next