configure identity-management role-based-vlan

configure identity-management role-based-vlan [add | delete] ports [port_list | all]

Description

This command defines

Syntax Description

role-based vlan Associates the identity to a specific VLAN (Virtual LAN) based on the identity's role.
add Adds ports to the Identity Management role-based vlan enabled portlist.
delete Deletes ports from the Identity Management role-based vlan enabled portlist.
ports Configures Identity Management role-based VLAN on ports.
port_list Configures Identity Management role-based VLAN on specified port list.
all Configures Identity Management role-based VLAN on all ports.

Default

N/A.

Usage Guidelines

Use this command to configure the role-based VLAN feature for Identity Management enabled ports. This command requires the ports to be part of a base VLAN. Enabling role-based VLAN on Identity Management enabled ports allows the identity to be placed in the correct VLAN mapped to the role as configured by the administrator.
Note

Note

You cannot enable the Identity Manager role-based VLAN feature on Netlogin enabled ports.

Example

The following example configures Identity Management on ports 1-3, and 5.

# configure identity-management role-based-vlan add ports 1-3,5        

History

This command was first available in ExtremeXOS 15.4.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.