Displays the SNMP (Simple Network Management Protocol) configuration and statistics on a virtual router.
| vr_name | Specifies the virtual router. |
N/A.
Use this command to display the SNMP configuration and statistics on a virtual router.
The following command displays configuration and statistics for the virtual router VR-Default:
show snmp vr VR-Default
Following is sample output for the command:
Print
this page
Email this topic
Feedback
View PDF
Download EPUBx670.54 # show snmp vr "VR-Default"
SNMP access : Enabled
SNMP ifMib ifAlias size : Default
SNMP Traps : Enabled
SNMP TrapReceivers :
Destination Source IP Address Flags
10.120.91.48 /162 32.1.0.2 2ET
10.120.91.48 /162 32.2.0.2 2ET
2001:2001:2001:2001:2001:2001:2001:2001 /16200 2001:2001:2001:2001:2001:2001:2001:20022ET
2001:2001:2001:2001:2001:2001:2001:2004 /16200 2ET
2334:0:0:0:0:0:0:2 /11555 2ET
Flags: Version: 1=v1 2=v2c 3=v3
Mode: S=Standard E=Enhanced
Notification Type: T=Trap I=Inform
SNMP stats: InPkts 0 OutPkts 0 Errors 0 AuthErrors 0
Gets 0 GetNexts 0 Sets 0 Drops 0
SNMP traps: Sent 0 AuthTraps Enabled
This command was first available in ExtremeXOS 12.4.2.
The SNMP ifMib ifAlias size status was added in ExtremeXOS 15.3.
The output was modified to display SNMPv3 notification targets and the notification type in ExtremeXOS 15.5.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.