show mac-locking stations

show mac-locking {first-arrival |static} {ports port_list}

Description

Displays MAC locking information about end stations connected to the switch.

Syntax Description

first-arrival Displays only first-arrival MAC locking information.
static Displays only static MAC locking information.
port_list Specifies one or more ports or slots and ports.

Default

N/A

Usage Guidelines

If you do not specify any parameters, MAC locking information for end stations on all ports (both static and first-arrival) is displayed.

Example

The following example displays MAC locking information for end stations on all ports.

show mac-locking stations

Port   MAC Address        Status    State          Aging
-----  -----------------  --------  -------------  -----
1:2    00:00:11:22:33:00  inactive  static         false
2:3    00:00:11:22:33:99  active    static         false
3:4    00:bb:00:00:00:00  active    first-arrival  false
4:5    00:e0:2b:00:00:01  active    first-arrival  true 
Total for all ports: 4 Static: 2 First-Arrival: 2
      

History

This command was first available in ExtremeXOS 15.7.1.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.