enable dhcp ports vlan

enable dhcp ports port_list vlan vlan_name

Description

`port_list`	Specifies the ports for which DHCP should be enabled.
`vlan_name`	Specifies the VLAN on whose ports DHCP should be enabled.

Disabled.

None.

The following command enables DHCP for port 5:9 in VLAN corp:

enable dhcp ports 5:9 vlan corp

This command was first available in ExtremeXOS 11.0.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published August 2017prev | next