show vlan statistics

show [{vlan} vlan_name |vlan vlan_list]statistics {no-refresh |refresh}


Displays VLAN (Virtual LAN) statistics at the VLAN level.

Syntax Description

vlan_name Specifies to display VLAN statistics from the VLAN with this name.
vlan_list Specifies a VLAN list of IDs.
no-refresh Specifies that there is no continuous refresh. The prompt comes back to the user after fetching statistics once.



Usage Guidelines

This command displays statistics based on the sum of the statistics for individual ports. Use it to display the VLAN statistics monitored using the configure ports [port_list|all] monitor vlan vlan_name | vlan_list {rx-only | tx-only} command.


The following command displays VLAN statistics:

# show vlan statistics
Vlan 				Rx Total 			     Rx Byte 						Tx Total 				Tx Byte
				     Frames 				Count 						Frames 					Count        ===============================================================================
Default 			    30251013                           7326296 											22034					901840

If the VLAN contains ports that do not support a certain type of VLAN statistic, such as transmit statistics or byte counters, then a dash character ( - ) will be displayed in that column.


This command was first available in ExtremeXOS 12.0.

Support for Summit family switches was added in ExtremeXOS 12.5.

The no-refresh keyword was removed in ExtremeXOS 16.1.

The vlan_list variable was added in ExtremeXOS 16.1.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.