enable bgp mpls-next-hop

enable bgp mpls-next-hop

Description

Enables IP forwarding over calculated MPLS (Multiprotocol Label Switching) LSPs to subnets learned via BGP (Border Gateway Protocol).

Syntax Description

This command has no arguments or variables.

Default

Disabled.

Usage Guidelines

This command enables IP forwarding over calculated MPLS LSPs to subnets learned via BGP. (Calculated refers to an LSP that only reaches part of the way to the destination). IP forwarding over MPLS LSPs must be enabled to forward over calculated LSPs. By default, IP forwarding over MPLS LSPs to subnets learned via BGP is disabled.

Example

The following command enables BGP‘s use of MPLS LSPs to reach BGP routes:

enable bgp mpls-next-hop

History

This command was first available in ExtremeXOS 11.6.

Platform Availability

This command is available only on the platforms that support MPLS as described in the ExtremeXOS 22.2 Feature License Requirements document.