Enables OpenFlow on specific VLAN (Virtual LAN)s .
| vlan | Specifies the VLAN on which to enable OpenFlow. |
| vlan_name | Specifies the VLAN name. |
No VLANs are enabled for OpenFlow by default.
Openflow can be enabled on multiple vlans in standard mode.
The following command specifies the vlan to enable OpenFlow on the switch:
enable openflow vlan "core"
This command was first available in ExtremeXOS 15.3.
This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the OpenFlow feature, see the ExtremeXOS 22.2 Feature License Requirements document.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB