configure ip-security dhcp-bindings storage location

configure ip-security dhcp-bindings storage location server [primary | secondary] ip_address | hostname]{vr vr-name} tftp

Description

Specifies the server location for the DHCP (Dynamic Host Configuration Protocol) bindings storage file. The uploads can be made to any TFTP server regardless of the virtual router that it is present in.

Syntax Description

ip_address Specifies the IP address location for the bindings storage file.
hostname Specifies the hostname of the server.
vr-name Specifies the virtual router name.
none Using no option unconfigures the server.

Default

N/A.

Usage Guidelines

This commands allows you to specify where you want to store the DHCP storage file that you created with the command configure ip-security dhcp-bindings storage filename name.

Note

Note

Using the command with no option unconfigures the server.

Example

The following command configures storage to the primary server 10.1.1.14:

configure ip-security dhcp-bindings storage location server primary 10.1.1.14 vr "VR-Default" tftp

The following example unconfigures the primary server:

configure ip-security dhcp-bindings storage location server primary

History

This command was first available in ExtremeXOS 12.1.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.