unconfigure mvrp stpd

unconfigure mvrp stpd


Resets the MVRP STP (Spanning Tree Protocol) domain.

Syntax Description

mvrp Multiple VLAN (Virtual LAN) Registration Protocol.
stpd The STP domain the VLAN is to be associated with. All ports of the domain will be advertised when this VLAN is registered.



Usage Guidelines

Use this command to reset the STP domain associated with a particular VLAN or all VLANs to default. If a VLAN is specified, the specific VLAN will be associated to the default STP, which is configured using the configure mvrp stpd stpd_name default command. If VLAN is not specified, all VLANs are associated to STP domain s0.


The following example illustrates the unconfigure mvrp stpd command:
unconfigure mvrp stpd 


This command was first available in ExtremeXOS 15.3.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.