disable dot1p replacement ports

disable dot1p replacement ports [port_list | all] {{qosprofile} qosprofile}

Description

Disables the ability to overwrite 802.1p priority values for a given set of ports.

Syntax Description

port_list Specifies a list of ports or slots and ports to which the parameters apply.
all Specifies that 802.1p replacement should be disabled for all ports.
qosprofile Disables 802.1p on a QoS (Quality of Service) profile.
Note: If this option is not specified it will disable dot1p replacement for all qosprofiles.
qosprofile Specifies the QoS profile number.

Default

N/A.

Usage Guidelines

The dot1p replacement feature is disabled by default.

Beginning with ExtremeXOS version 11.4 on the 1 Gigabit Ethernet ports, 802.1p replacement always happens when you configure the DiffServ traffic grouping.

Example

The following example disables 802.1p value replacement on all ports:

disable dot1p replacement ports all

History

This command was first available in ExtremeXOS 11.0.

The qosprofile keyword and qosprofile variable were added in ExtremeXOS 16.1.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.