configure eaps hello-pdu-egress
Description
Configures the port through which a master node sends EAPS (Extreme Automatic Protection Switching) hello PDUs.
Syntax Description
name | Specifies the name of an EAPS domain. |
Default
Default is the primary port.
Usage Guidelines
This command is provided for special network topologies that use spatial reuse and require that all EAPS hello PDUs travel in the same direction on the ring.

Note
We recommend the default (primary-port) configuration for this command.
Example
The following command configures the master switch to send EAPS hello packets from the secondary port:
configure eaps "domain12" hello-pdu-egress secondary-port
History
This command was first available in ExtremeXOS 12.4.2.
Platform Availability
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.