Configure the output network clock source as bits bnc 1 or 2.
| bits-bnc-1 | Bits Clock 1 BNC connector. |
| 1pps | 1pps output clock. |
| 8KHz | 8 KHz output clock (default). |
| bits-bnc-2 | Bits Clock 2 BNC connector. |
| E1 | E1 (2.048 MHz) output clock (default). |
| T1 | T1 (1.544 MHz) output clock. |
| 10MHz | 10 MHz output clock. |
The default output clock source for Bits Clock 1 BNC connector is 8 KHz, and the default for Bits Clock 2 BNC connector is E1 (2.048 MHz).
The Summit X460-G2 series switches have clock sources beyond SyncE. The clock which drives all of the ports on a switch may be selected from:
The following command configures the region as T1:
configure network-clock clock-source input region t1
The following command configures the network-clock source as TDM:
configure network-clock clock-source input tdm
This command was first available in ExtremeXOS 15.1.
This command is available on the Summit X460-G2 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB