show network-clock gptp

show network-clock gptp {default-set | current-set | parent-set | time-properties-set}

Description

Displays global gPTP configuration and data.

Syntax Description

default-set Displays this switch‘s native time capabilities.
current-set Displays this switch‘s state relative to the grandmaster system.
parent-set Displays the upstream (i.e., toward the grandmaster) system‘s parameters.
time-properties-set Displays the grandmaster‘s parameters.

Default

N/A.

Usage Guidelines

Use this command to display whether gPTP is enabled in the switch and the ports on which gPTP is enabled.

Example

# show network-clock gptp   
gPTP status         : Enabled
BMCA                : Off
Static slave port   : None 
gPTP enabled ports  : *1m     *21d    *22d    *47d    
 
Flags:        (*) Active,  (!) Administratively disabled,
              (d) Disabled gPTP port role, (m) Master gPTP port role,
              (p) Passive gPTP port role,  (s) Slave gPTP port role


# show network-clock gptp default-set   
Local Clock Identity                : 00:04:96:FF:FE:52:2C:BE   
Number of gPTP ports                : 24   
Local Clock Class                   : 255 (slave only clock)    
Local Clock Accuracy                : 254 (unknown)
Local Offset Scaled Log Variance    : 65535   
GM Capable                          : No   
Local Priority1                     : 255
Local Priority2                     : 248
Current UTC Offset                  : unknown   
Leap 59                             : No   
Leap 61                             : No   
Time Traceable                      : No   
Frequency Traceable                 : No   
Time Source                         : 160 (Internal Oscillator)       

# show network-clock gptp current-set        
Steps Removed                       : 1   
Offset from GM                      : 10 nanoseconds   
Last GM Phase Change                : 548 nanoseconds   
Last GM Frequency Change            : 100   
GM Time Base Indicator              : 2   
GM Change Count                     : 1   
Last GM Change Event                : Tue Nov 22 03:32:07 2011   
Last GM Frequency Change Event      : Tue Nov 22 03:32:07 2011   
Last GM Phase Change Event          : Tue Nov 22 03:32:07 2011       

# show network-clock gptp parent-set   
Parent Clock Identity               : 00:04:96:FF:FE:52:34:5F   
Parent port number                  : 21   
Cumulative Rate Ratio               : 10000   
GM Clock Identity                   : 00:12:34:FF:FE:56:78:9A   
GM Clock Accuracy                   : 32 (25 ns)   
GM Offset Scaled Log Variance       : 32767   
GM Priority1                        : 245   
GM Priority2                        : 248       

# show network-clock gptp time-properties-set   
Current UTC Offset                  : 33 seconds   
Leap 59                             : No   
Leap 61                             : No   
Time Traceable                      : Yes   
Frequency Traceable                 : Yes   
Time Source                         : 32 (GPS)    

History

This command was first available in ExtremeXOS 15.3.

Support for BCMA was first available in ExtremeXOS 15.7.1.

Platform Availability

This command is available on Summit X450-G2, X460-G2, X670-G2, and ExtremeSwitching X440-G2, X620 series switches if the AVB feature pack license is installed on the switch.