enable radius dynamic-authorization

enable radius dynamic-authorization


Enables dynamic authorization RADIUS (Remote Authentication Dial In User Service) accounting.

Syntax Description

This command has no arguments or variables.


Dynamic authorization RADIUS accounting is disabled by default.

Usage Guidelines

Before you enable RADIUS on the switch, you must configure the servers used for authentication and configure the authentication string (shared secret) used to communicate with the RADIUS authentication server.

To configure the RADIUS authentication servers and shared secret, use the following command:

configure radius dynamic-authorization index server [host_ipaddr | host_ipV6addr | hostname] client-ip [client_ipaddr | client_ipV6addr] {vr vr_name} {shared-secret {encrypted} secret}


The following command enables dynamic authorization RADIUS authentication on the switch:

enable radius dynamic-authorization 


This command was first available in ExtremeXOS 22.1.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.