Enables SNMP (Simple Network Management Protocol) traps associated with MPLS (Multiprotocol Label Switching) for all MPLS configured VLANs.
This command has no arguments or variables.
All MPLS traps are disabled.
The following command enables SNMP traps associated with MPLS:
enable snmp traps mpls
This command was first available in ExtremeXOS 11.6.
This command is available only on the platforms that support MPLS as described in the ExtremeXOS 22.2 Feature License Requirements document.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB