unconfigure policy maptable

unconfigure policy maptable [ response | vlan_list]


Use this command to clear a VLAN (Virtual LAN) to policy mapping table entry or to reset the maptable response to the default value of policy mode.

Syntax Description

maptable Clear VLAN ID - Policy Profile mappings table.
response Specifies that the response should be reset to the default value of policy.
vlan_list Specifies the VLAN ID or range of IDs (1 to 4094) to clear.




This example resets the policy mappings table response to the default value of policy.

unconfigure policy maptable response


This command was first available in ExtremeXOS 16.1.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.