disable clear-flow

disable clear-flow


Disable the CLEAR-Flow agent.

Syntax Description

This command has no arguments or variables.


CLEAR-Flow is disabled by default.

Usage Guidelines

When the CLEAR-Flow agent is disabled, sampling stops and the and all rules are left in the current state. It will not reset actions that were taken while CLEAR-Flow was enabled.


The following example disables CLEAR-Flow on the switch:

disable clear-flow


This command was first available in ExtremeXOS 11.1.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.