show policy capability

show policy capability

Description

This command to display all policy classification capabilities supported by your device.

Syntax Description

This command has no arguments or variables.

Default

N/A.

Usage Guidelines

The output of this command shows a table listing classifiable traffic attributes and the type of actions, by rule type, that can be executed relative to each attribute. Above the table is a list of all the actions possible on this device.

Example

The following example displays all policy classification capabilities supported by the device:

# show policy capability
The following supports related to policy are supported in this device:
----------------------------------------------------------------------

Priority                Permit                  Deny
TCI Overwrite           Rules Table             CoS Table
Longest Prefix Rules    RFC 3580 Map            Policy Enable
Authentication Override

===========================================================================
|                         | D |   |   |   |   | F |   |   | D | T |   | Q |
|                         | Y |   |   |   |   | O | S |   | I | C | M | U |
|                         | N | A |   |   |   | R | Y |   | S | I | I | A |
|                         | A | D | V |   | D | W | S | T | A | O | R | R |
|                         | M | M | L | C | R | A | L | R | B | V | R | A |
|                         | I | I | A | O | O | R | O | A | L | E | O | N |
| SUPPORTED RULE TYPES    | C | N | N | S | P | D | G | P | E | R | R | T |
===========================================================================
|MAC source address       | X | X |   | X | X | X |   |   |   |   |   | X | 
|MAC destination address  |   |   |   | X | X | X |   |   |   |   |   | X | 
|IPX source address       |   |   |   |   |   |   |   |   |   |   |   |   | 
|IPX destination address  |   |   |   |   |   |   |   |   |   |   |   |   | 
|IPX source socket        |   |   |   |   |   |   |   |   |   |   |   |   | 
|IPX destination socket   |   |   |   |   |   |   |   |   |   |   |   |   | 
|IPX transmission control |   |   |   |   |   |   |   |   |   |   |   |   | 
|IPX type field           |   |   |   |   |   |   |   |   |   |   |   |   | 
|IPv6 source address      |   |   |   |   |   |   |   |   |   |   |   |   | 
|IPv6 destination address |   |   |   | X | X | X |   |   |   |   |   | X | 
|IPv6 flow label          |   |   |   |   |   |   |   |   |   |   |   |   | 
|IP source address        |   |   |   | X | X | X |   |   |   |   |   | X | 
|IP destination address   |   |   |   | X | X | X |   |   |   |   |   | X | 
|IP fragmentation         |   |   |   | X | X | X |   |   |   |   |   | X | 
|UDP port source          |   |   |   | X | X | X |   |   |   |   |   | X | 
|UDP port destination     |   |   |   | X | X | X |   |   |   |   |   | X | 
|TCP port source          |   |   |   | X | X | X |   |   |   |   |   | X | 
|TCP port destination     |   |   |   | X | X | X |   |   |   |   |   | X | 
|ICMP packet type         |   |   |   |   |   |   |   |   |   |   |   |   | 
|TTL                      |   |   |   | X | X | X |   |   |   |   |   | X | 
|IP type of service       |   |   |   | X | X | X |   |   |   |   |   | X | 
|IP proto                 |   |   |   | X | X | X |   |   |   |   |   | X | 
|ICMPv6 packet type       |   |   |   |   |   |   |   |   |   |   |   |   | 
|Ether II packet type     |   |   |   | X | X | X |   |   |   |   |   | X | 
|LLC DSAP/SSAP/CTRL       |   |   |   |   |   |   |   |   |   |   |   |   | 
|VLAN tag                 |   |   |   |   |   |   |   |   |   |   |   |   | 
|Replace TCI              |   |   |   |   |   |   |   |   |   |   |   |   | 
|Application Layer        |   |   |   |   |   |   |   |   |   |   |   |   | 
|Access Control List      |   |   |   |   |   |   |   |   |   |   |   |   | 
|Port string              | X | X |   | X | X | X |   |   |   |   |   | X | 
===========================================================================

History

This command was first available in ExtremeXOS 16.1.

The authentication override status was added in ExtremeXOS 22.2

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.