configure policy convergence-endpoint

configure policy convergence-endpoint [enable | disable]

Description

This command globally enables or disables Convergence End Point (CEP) for ONEPolicy.

Syntax Description

enable Enables CEP for ONEPolicy.
disable Disables CEP for ONEPolicy.

Default

By default CEP is disabled.

Usage Guidelines

This feature requires that ONEPolicy is enabled on the switch (see enable policy).

Example

The following example enables CEP on the switch:

# configure policy convergence-endpoint enable

History

This command was first available in ExtremeXOS 22.2.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.