configure erps add protected vlan

configure erps ring-name add protected {vlan} vlan_name

Description

Add a protected VLAN (Virtual LAN) on the ERPS (Ethernet Ring Protection Switching) ring. This is a data VLAN that ERPS will protect.

`ring-name`	Alphanumeric string that identifies the ERPS ring.
`vlan_name`	Alphanumeric string identifying the data VLAN to be added that ERPS will protect. This can be a VLAN, SVLAN, BVLAN or VMAN.

N/A.

Use this command to add a protected data VLAN on the ERPS ring. This VLAN will be protected by ERPS, and it can be a VLAN, SVLAN, BVLAN or VMAN.

Note

The SVLAN-BVLAN combination cannot both be added to the same ring or sub-ring.

The following command adds a protected VLAN named “vlan10” to an ERPS ring named “ring1”:

configure erps ring1 add protected vlan vlan10

This command was first available in ExtremeXOS 15.1.

This command is available on all platforms supported in 12.6 and forward that are running ExtremeXOS.

Published August 2017prev | next