configure ospfv3 add virtual-link

configure ospfv3 add virtual-link {routerid} router_identifier {area} area_identifier

Description

Adds a virtual link connected to another ABR.

Syntax Description

`router_identifier`	Specifies the router ID of the other end of the link.
`area_identifier`	Specifies the transit area identifier, a four-byte, dotted decimal number.

Default

N/A.

Usage Guidelines

A virtual link provides a logical path between the ABR of the disconnected area and the ABR of the normal area that connects to the backbone. A virtual link must be established between two ABRs that have a common area, with one ABR connected to the backbone. Specify the following:

router_identifier—Far-end router identifier, a four-byte, dotted decimal number.
area_identifier—Transit area used for connecting the two end-points. The transit area cannot have the area identifier 0.0.0.0. and cannot be a stub area or an NSSA.

Example

The following command configures a virtual link with router ID 10.1.2.1 through the transit area 10.1.0.0:

configure ospfv3 add virtual-link 10.1.2.1 10.1.0.0

History

This command was first available in ExtremeXOS 11.2.

Platform Availability

This command is available on platforms with an Advanced Edge or Core license as described in the ExtremeXOS 22.2 Feature License Requirements document.

Published August 2017prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback