show isis neighbors

show isis neighbors {area area_name} {vlan vlan_name} {ipv4 | ipv6} {detail}

Description

This command displays information about neighbors and their adjacencies.

Syntax Description

area_name Specifies a router process for which to specify neighbor information. If you do not specify an IS-IS area, the software displays the neighbors in all areas.
vlan_name Specifies a VLAN (Virtual LAN) for which to specify neighbor information.
ipv4 Displays only the neighbors that advertise the IPv4 protocol as supported.
ipv6 Displays only the neighbors that advertise the IPv6 protocol as supported.
detail Displays detailed information for IS-IS neighbors.

Default

N/A.

Usage Guidelines

If you do not specify either the ipv4 or the ipv6 keyword, this command displays all neighbors regardless of the supported protocol.

Example

The following command displays IS-IS neighbor information for areax:

show isis neighbors area areax

History

This command was first available in ExtremeXOS 12.1.

Platform Availability

This command is available on platforms with a Core license.