enable snmp access vr

enable snmp access vr [vr_name | all]


Selectively enables SNMP (Simple Network Management Protocol) access on virtual routers.

Syntax Description

vr_name Specifies the virtual router name.
all Specifies all virtual routers.


Enabled on all virtual routers.

Usage Guidelines

Use this command to enable SNMP access on any or all virtual routers.

To disable SNMP access on virtual routers, use the disable snmp access vr command.

To display the SNMP configuration and statistics on a specified virtual router, use the show snmp vr_name command.


The following command enables SNMP access on the virtual router vr-finance:

enable snmp access vr vr-finance


This command was first available in ExtremeXOS 12.4.2.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.