configure msrp ports traffic-class delta-bandwidth

configure msrp ports [port_list | all] traffic-class [A | B] delta-bandwidth percentage

Description

Configures delta-bandwidth value per traffic class per MSRP port.

Syntax Description

msrp Multiple Stream Registration Protocol.
port_list List of ports in the switch.
traffic-class Traffic class.
A Traffic class A.
B Traffic class B.
delta-bandwidth Delta-bandwidth percentage (range 0 to 100, default 75 for class A, 0 for class B).

Default

Class A: 75, Class B: 0.

Usage Guidelines

The delta bandwidth configuration limits the amount of bandwidth that can be used by the given stream reservation class. Each class is allowed to use a maximum of its delta bandwidth plus the delta bandwidth configured for each of the higher classes. For example, if the delta bandwidth for classes A and B are configured to 10 and 10 respectively, class A streams can use up to 10 percent of the link bandwidth, and class B streams can us up to 20 percent of the link bandwidth. The sum of the class A and B delta bandwidth values must be less than 100 percent.

Example

configure msrp ports all traffic-class A delta-bandwidth 50
configure msrp ports 1-5 traffic-class B delta-bandwidth 0 

History

This command was first available in ExtremeXOS 15.3.

Platform Availability

This command is available on Summit X450-G2, X460-G2, and X670-G2 switches if the AVB feature pack license is installed on the switch.