configure pim iproute sharing hash

configure pim {ipv4 | ipv6} iproute sharing hash [source | group | source-group | source-group-nexthop]

Description

This command is used to configure the PIM ECMP (Equal Cost Multi Paths) hash algorithm.

Syntax Description

ipv4 Specifies the IPv4 address family.
ipv6 Specifies the IPv6 address family.
hash Configure Hash Algorithm for Equal Cost Multipath Routing.
source Hash for route sharing is based on source address only.
group Hash for route sharing is based on group address only.
source-group Hash for route sharing is based on source and group addresses.
source-group-nexthop Hash for route sharing is based on source, group, and next hop addresses (default).

Default

Source-group-nexthop.

Usage Guidelines

Use this command to modify the hash algorithm used by PIM for path selection.

Example

The following command configures the PIM ECMP hash algorithm based on source-group-nexthop:

configure pim ipv6 iproute sharing hash source-group-nexthop

History

This command was first available in ExtremeXOS 15.3.2.

Platform Availability

This command is available on platforms that support the appropriate license.