disable diffserv replacement ports

disable diffserv replacement ports [port_list | all] {{qosprofile} qosprofile}

Description

Disables the replacement of DiffServ code points in packets transmitted by the switch.

`port_list`	Specifies a list of ports or slots and ports on which Diffserv replacement will be disabled.
all	Specifies that DiffServ replacement should be disabled for all ports.
qosprofile	Disables DiffServ on a QoS (Quality of Service) profile. Note: If this option is not specified it will disable DiffServ replacement on all qosprofiles.
`qosprofile`	Specifies the QoS profile number.

The DiffServ replacement feature is disabled by default.

N/A.

The following example disables DiffServ replacement on selected ports:

disable diffserv replacement ports 1:2,5:5,6:6

This command was first available in ExtremeXOS 11.0.

The qosprofile keyword and qosprofile variable were added in ExtremeXOS 16.1.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published August 2017prev | next