show mvrp

show mvrp

Description

This command is used to show the mvrp settings as follows. If the MVRP enabled port is a load shared port, a suffix ‘g‘ is displayed.

Syntax Description

mvrp Multiple VLAN (Virtual LAN) Registration Protocol.

Default

N/A.

Usage Guidelines

Use this command to show the MVRP settings.

Example

# show mvrp   
MVRP enabled               : Enabled   
MVRP dynamic VLAN creation : Enabled
MVRP VLAN registration     : Forbidden 
MVRP default STP domain    : s0   
MVRP enabled ports         : 9    *11    *13
Flags: (*) Active, (!) Administratively disabled.
       (g) Load Sharing Port
       (G) Multi-switch LAG Group port 

History

This command was first available in ExtremeXOS 15.3.

MRVP VLAN registration output was added in 15.3.2.

Flag showing if the MVRP-enabled port is an MLAG (Multi-switch Link Aggregation Group) port added in ExtremeXOS 22.1

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.