unconfigure rip

unconfigure rip {vlan vlan-name | all}

Description

Resets all RIP (Routing Information Protocol) parameters to the default for all VLAN (Virtual LAN)s or for the specified VLAN.

vlan-name

Specifies a VLAN name.

All.

Does not change the enable/disable state of the RIP settings.

The following command resets the RIP configuration to the default for the VLAN finance:

unconfigure rip finance

This command was first available in ExtremeXOS 10.1.

This command is available on all platforms with an Edge, Advanced Edge, or Core license.

Published August 2017prev | next