show stpd ports counters

show stpd stpd_name ports {port_list} counters


Displays all counters for Spanning Tree.

Syntax Description

stpd_name Specifies an STPD (Spanning Tree Domain) name on the switch.
port_list Specifies one or more ports or slots and ports.
counters Displays counters for the specified port.



Usage Guidelines



The following example displays the counters for port 10:10 in STP (Spanning Tree Protocol) domain r1:

show stpd r1 ports 10:10 counters

Port 10:10
Disputed BPDU             : 0
Invalid BPDU              : 0
Message Expiration        : 0
STP BPDU Rx               : 0
STP BPDU Tx               : 0
STP TCN BPDU Rx           : 0
STP TCN BPDU Tx           : 0
STP TC BPDU Rx            : 0
STP TC BPDU Tx            : 0
RST BPDU Rx               : 0
RST BPDU Tx               : 0
RST TC BPDU Rx            : 0
RST TC BPDU Tx            : 0
MST BPDU Rx               : 1287
MST BPDU Tx               : 4
MST CIST TC BPDU Rx       : 2
MST CIST TC BPDU Tx       : 2
Forward Transitions Count : 1 


This command was first available in ExtremeXOS 15.7.1.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.