configure isis timer retransmit-interval

configure isis [vlan all | {vlan} vlan_name] timer retransmit-interval seconds

Description

This command sets the time to wait for an acknowledgement of a transmitted LSP on a point-to-point interface.

vlan all	Applies the timer value to all IS-IS VLAN (Virtual LAN)s.
`vlan_name`	Specifies a single VLAN to which the timer configuration applies.
`seconds`	Defines the timer value. The range is 0 to 65535 seconds.

5 seconds.

If an acknowledgement is not received when the timer expires, the LSP is resent and the timer is reset.

The following command sets the retransmit interval for the SJvlan to 10 seconds:

configure isis SJvlan timer retransmit-interval 10

This command was first available in ExtremeXOS 12.1.

This command is available on platforms with a Core license.

Published August 2017prev | next