show ntp restrict-list
show ntp restrict-list {user | system} {{vr}vr_name}
Description
Shows the NTP access list of the current system based on the source IP blocks.
Syntax Description
user | Displays the NTP access list of the current user. |
system | Displays the for the current system. |
all | Displays both user and system data. |
vr | Specifies showing NTP information for a given VR. |
vr_name | Specifies which VR to show information about. If a VR name is not specified, the VR of the current command context is used. |
Default
Displays all by default.
Usage Guidelines
N/A.
Example
The following command displays all NTP access list information for VR "VR-Mgmt":
# show ntp restrict-list user vr "VR-Mgmt" VR Name IP Address Mask Count Type Action ======================================================================== VR-Mgmt 1.1.1.1 255.255.255.255 0 User Permit
History
This command was first available in ExtremeXOS 12.7.
The vr keyword was added in ExtremeXOS 22.2.
Platform Availability
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.