This command enables the user to input a weight value for queue service weighting in the weighted-round-robin scheduler or weighted-deficit-round-robin scheduler for this QoS (Quality of Service) profile. The weight value of both WRR and WDRR algorithms have been extended to 1-127 on this supported hardware (refer to the ExtremeXOS 22.2 User Guide for supported hardware).
weight_value | Range is 1-15 or 1-127 depending on hardware type. |
Strict priority.
Use this command to input a weight value for queue service weighting in the weighted-round-robin scheduler or weighted-deficit-round-robin scheduler for this QoS profile. The weight value of both WRR and WDRR algorithms have been extended to 1-127 on this supported hardware (refer to the ExtremeXOS 22.3 User Guide for supported hardware).
Example output not yet available and will be provided in a future release.
This command was first available in ExtremeXOS 12.7.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.