disable bootprelay ipv6

disable bootprelay { ipv4 | ipv6} {vlan vlan_name} | { vr vr_name} | all {vr vr_name}


Disables BOOTPRelay v6. This can be done across the VR or on a per VLAN (Virtual LAN) basis.

Syntax Description

bootprelay BOOTP Relay service.
IPv4 DHCPv4 BOOTP Relay service.
IPv6 DHCPv6 BOOTP Relay service.
vlan_name Specifies the VLAN name
vr_name Specifies the vrtual router name.
all Disables all VLANs.



Usage Guidelines

Use this command to disable BOOTP Relay across the VR or on a per VLAN basis.


The following command displays IPv6 bootprelay information:

* switch #  show bootprelay ipv6
BOOTP Relay: DHCPv6 BOOTP Relay enabled on virtual router "VR-Default"    
    BOOTP Relay Servers : 2001:0db8:85a3:0000:0000:8a2e:0370:7334                         
VLAN "Default":     
   BOOTP Relay          : Disabled
VLAN "v1":    
   BOOTP Relay          : Enabled    
   BOOTP Relay Servers  : 2001:0db8:85a3:0000:0000:8a2e:0370:7338    
   Interface ID         : v1-12     
    Remote ID           :v1_remId
   BOOTP Relay          : Enabled    
   BOOTP Relay Servers  : 2001:0db8:85a3:0000:0000:8a2e:0370:7339    
   Interface ID         : 100 (Default)     
   Remote ID            : 00:04:96:52:A7:1B (Default)


This command was first available in ExtremeXOS 15.5.

Platform Availability

This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the PIM feature, see the ExtremeXOS 22.2 Feature License Requirements document.