disable snmp traps configuration

disable snmp traps configuration [save | change]

Description

Disables sending SNMP (Simple Network Management Protocol) trap when saving or changing the switch configuration.

Syntax Description

configuration Sends SNMP trap for switch configuration.
save Disables SNMP trap when switch configuration is saved (default is disabled).
change Disables SNMP trap when switch configuration is changed (default is disabled).

Default

The default is that SNMP traps are disabled for switch configuration changes/saves.

Example

The following example disables SNMP traps for switch configuration saves:

disable snmp traps configuration save

History

This command was first available in ExtremeXOS 22.1.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches..