enable snmp traps lldp
Description
Enables the transmission of LLDP (Link Layer Discovery Protocol) SNMP (Simple Network Management Protocol) trap notifications.
Syntax Description
all | Specifies all ports on the switch. |
port_list | Specifies one or more ports or slots and ports. |
Default
Disabled.
Usage Guidelines

Note
To enable SNMP traps for LLDP MED TLVs, you must issue a separate command; use the enable snmp traps lldp-med {ports [all | port_list]} .
If you do not specify any ports, the system sends LLDP traps for all ports.

Note
The Avaya-Extreme proprietary TLVs do not send traps.
Example
The following command enables LLDP SNMP traps for all ports:
enable snmp traps lldp ports all
History
This command was first available in ExtremeXOS 11.2.
Platform Availability
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.