configure rip vlan cost

configure rip vlan [vlan_name | all] cost cost

Description

Configures the cost (metric) of the interface.

`vlan_name`	Specifies a VLAN (Virtual LAN) name.
all	Specifies all VLANs.
`cost`	Specifies a cost metric.

The default setting is 1.

The specified interface cost is added to the cost of the route received through this interface.

The following command configures the cost for the VLAN finance to a metric of 3:

configure rip vlan finance cost 3

This command was first available in ExtremeXOS 10.1.

This command is available on all platforms with an Edge, Advanced Edge, or Core license.

Published August 2017prev | next