Print
this page
Email this topic
Feedback
View PDF
Download EPUBenable iparp checking
enable iparp {vr vr_name} checking
Description
Enables checking if the ARP request source IP address is within the range of the local interface or VLAN (Virtual LAN) domain.
Syntax Description
| vr_name | Specifies a VR or VRF. |
Default
Enabled.
Usage Guidelines
If you do not specify a VR or VRF, the command applies to the current VR context.
Example
The following example enables IP ARP checking:
enable iparp checking
History
This command was first available in ExtremeXOS 10.1.
The vr option was added in ExtremeXOS 11.0.
Platform Availability
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.