configure ip-security dhcp-bindings add

configure ip-security dhcp-binding add ip ip_address mac mac_address {vlan} vlan_name server-port server_port client-port client_port lease-time seconds

Description

Creates a DHCP (Dynamic Host Configuration Protocol) binding.

Syntax Description

ip_address Specifies the IP address for the DHCP binding.
mac_address Specifies the MAC address for the DHCP binding.
vlan_name Specifies the name of the VLAN (Virtual LAN) for the DHCP binding.
server_port Specifies the server port for the DHCP binding.
client_port Specifies the client port for the DHCP binding.
seconds Specifies the number of seconds for the lease.

Default

N/A.

Usage Guidelines

This commands allows you to add a DHCP binding in order to re-create the bindings after reboot and to allow IP Security features to work with clients having static IP addresses.

Note

Note

Setting the lease-time to 0 causes the DHCP binding to be static; in other words, it is not aged-out if no DHCP renew occurs. This is for use with clients using static IP addresses.

History

This command was first available in ExtremeXOS 12.1.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.