show diffserv replacement

Description

Displays the DiffServ replacement code-point values assigned to each QoS (Quality of Service) profile.

N/A.

N/A.

Once you alter the default mappings, the “->” in the display (shown below) becomes “* >”.

The following is sample output:

show diffserv replacement
QOSProfile->CodePoint mapping:
QP1->00
QP8->56

This command was first available in ExtremeXOS 10.1.

The ports keyword was first available in ExtremeXOS 12.2.2.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published August 2017prev | next