configure vlan router-discovery retransmit-time
Description
Configures the retransmit time value in router discovery advertisements on the VLAN (Virtual LAN).
Syntax Description
vlan_name | Specifies an IPv6 configured VLAN. |
retransmittime | Specifies the reachable time value in advertisements, in milliseconds. Range is 0 to 4,294,967,295 (approximately 50 days). |
Default
1,000 milliseconds.
Usage Guidelines
This command configures the retransmit time value in the router advertisement messages.
The retransmit time, in milliseconds, is the time between retransmitted neighbor solicitation messages. A value of 0 means the value is unspecified by this router. The maximum value is 4,294,967,295.
Example
The following example configures the retransmit time to be 604,800,000 milliseconds (one week) for the VLAN "top_floor":
configure vlan top_floor router-discovery retransmit-time 604800000
History
This command was first available in ExtremeXOS 11.2.
Platform Availability
This command is available on the platforms listed for the IPv6 unicast routing feature in the ExtremeXOS 22.2 Feature License Requirements document.