enable fdb static-mac-move

enable fdb static-mac-move


Enables EMS and SNMP (Simple Network Management Protocol) reporting of discovered MAC addresses that are duplicates of statically configured MAC addresses.

Syntax Description

This command has no arguments or variables.



Usage Guidelines

This command enables reporting only. All packets that arrive from a duplicate MAC address on another port (other than the statically configured port) are dropped.

The switch reports the source MAC address, port, and VLAN (Virtual LAN) for each duplicate MAC address.


The following command enables this feature:

enable fdb static-mac-move


This command was first available in ExtremeXOS 12.7.

Platform Availability

This command is available on Summit family switches.