show ovsdb schema hardware_vtep

show ovsdb schema hardware_vtep


Shows high-level information for the hardware_vtep schema.

Syntax Description

schema OVSDB schema.
hardware_vtep Hardware VXLAN tunnel end-point (VTEP).




The following example shows high-level information for the hardware_vtep schema:

# show ovsdb schema hardware_vtep
OVSDB server
Enabled :                 : yes
SSL certificate           : present

hardware_vtep schema
Control Layer enabled     : yes
Data Forwarding enabled   : yes
LBS update interval       : 60 seconds

Configured connections    : 1
IP address        Port  Type          Schema          
---------------  -----  ------------  ----------------       6632  SSL - client  hardware_vtep   

Manager Table connections : 1
Target                      State       Time                 Count  Flags
--------------------------  ----------  -------------------  -----  -----
ssl:        active      2016-10-10 09:17:08      1  Uu   

Flags: (A) Server has active connections, (d) Most recent disconnect time
       (D) Client connection is down, (s) Connect and disconnect time are same
       (u) Most recent connect time, (U) Client connection is up
       (Z) Server has no connections


This command was first available in ExtremeXOS 22.1.

Platform Availability

This command is supported on the Summit X770, X670-G2, and ExtremeSwiching X870, X690 series switches, and stacks with X770, X670-G2, X870, and X690 slots only.