configure ip-security dhcp-snooping information circuit-id vlan-information

configure ip-security dhcp-snooping information circuit-id vlan-information vlan_info {vlan} [vlan_name | all]

Description

Configures the VLAN (Virtual LAN) info portion of the circuit ID of a VLAN.

Syntax Description

vlan_info Specifies the circuit ID VLAN information for each VLAN in the format of VLAN Info-Port Info; maximum length is 32 bytes.
vlan_name Specifies the VLAN for which DHCP (Dynamic Host Configuration Protocol) should be enabled.
all Specifies all VLANs.

Default

The default value is the ASCII representation of the ingress VLAN‘s ID.

Usage Guidelines

This command allows you to configure the VLAN information portion of the circuit ID of a VLAN. The VLAN info is a string of characters of up to 32 bytes in length, and is entered in the format of VLAN InfoPort Info. When a specific value is not configured for a VLAN, vlan_info defaults to the ASCII representation of the ingress VLAN‘s ID.

History

This command was first available in ExtremeXOS 12.1.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.