show sharing health-check

show sharing health-check

Description

Displays the configured health check LAGs on a switch.

Syntax Description

This command has no arguments or variables.

Default

N/A.

Usage Guidelines

Use this command to display the health-check LAGs that have been configured on the switch.

Example

The following is sample output from this command:

# show sharing health-check
Member  Agg Admin Track           Track
Group    Port  Mbr State IP Addr         TCP Port Miss Freq State   Dn   Up
================================================================================
2:8       2:1*  Y   En   30.1.1.1        23          3    3   Up    0    1
2:2*  Y   En   30.1.1.2        23          3    3   Up    0    1
2:3*  Y   En   30.1.1.3        23          3    3   Up    0    1
2:8*  -   En   30.1.1.8        80          3   10 Down    0    0
2:11*  Y   -    -               -           -    -    -    -    -
2:12*  -   En   44.1.3.2        80          3    4 Down    0    0
2:16   -   En   30.1.1.16       80          3   10  Dis    0    0
2:20     2:20*  Y   En   192.1.1.1       80          10   3   Up    0    1
2:21*  Y   En   192.1.1.2       80          10   3   Up    0    1
================================================================================
Member Port Flags: (*)Active, (!) Disabled

History

This command was first available in ExtremeXOS 12.13.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.