enable stpd rapid-root-failover

enable stpd stpd_name rapid-root-failover

Description

Enables rapid root failover for faster STP (Spanning Tree Protocol) recovery times.

Syntax Description

stpd_name Specifies an STPD (Spanning Tree Domain) name on the switch.

Default

Disabled.

Usage Guidelines

This command is applicable for STPDs operating in 802.1D.

If you create an STPD with a unique name, the keyword stpd is optional.

To view the status of rapid root failover on the switch, use the show stpd command. The show stpd command displays information about the STPD configuration on the switch including the enable/disable state for rapid root failover.

Example

The following command enables rapid root fail over on STPD Backbone_st:

enable stpd backbone_st rapid-root-failover

History

This command was first available in ExtremeXOS 10.1.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.